back to main menu back to options menu
Industrial Monitor- Monochrome CRT Display
7" Open Frame Monitor
(Replaces Motorola & Display Tech M1500 and MD1500)
Industrial Monitor- Replaces Motorola & Display Tech M1500 and MD1500 7 inch

Features
• HIGH PERFORMANCE; 700LINES OF RESOLUTION
• LOW POWER: 12VDC a 1150 mA
• HIGH RELIABILITY DESIGN: DOUBLE SIDED,
   PLATED THRU PCB
• CUSTOM DESIGNS AVAILABLE
• COMPETITIVE PRICE/QUICK RESPONSE

The design of the Omni Vision 7monitor provides high performance at a reasonable cost. Display stability over a wide temperature ranger and crisp resolution are the cornerstones of Omni Vision 7's performance.

FEATURES
• All circuitry is on a single, double sided, plated through PCB.
• All controls are together and are easily accessible from the top of the monitor.
• The video display is stabilized through use of voltage controlled, temperature compensated feedback to synchronized free oscillators.
• Electronic horizontal video centering.
• The Omni Vision 7 is designed to UL. CSA specifications and applicable DHHS rules on X-Radiation.
• 10 pin edge connector.
• Polished or anti glare faceplates.
• Omni Vision 7 Chassis.

RESOLUTION
With a video amplifier response to 26MHz in either the TTL or Composite Video version, video and alpha numeric data is displayed clearly and crisply with a Center Resolution of 700 lines.
POWER
When scanning full screen, the Omni Vision 7 operates nominally at 12VDC and 1150 mA
OPTIONS
• Remote Brightness Control
• Remote Contrast Control o
• Wide range at Phosphors Omni Vision 7 Kit
• BNC Video Input Connector
• +12VDC Power Connector
• 10 or 20 pin header
SPECIFICATIONS
CRT:

7" Diagonal, 85° deflection angle, viewing angle 26 in² max.
Neck: 20mm
Scanning Frequencies: Factory adjusted for operaton within 1kHz of center frequencies at 15.7kHz, 18.6kHz or 21.6kHz.
Input Signals  
TTL
    Signal:        Positive polarity
    Horizontal:
                      Input Impedance
                      Typical Signal
                      Acceptable range
+2.5V to +5.0V; Reverse polarity signals may require board modification
Greater than 6k ohms
4.5 microSeconds
2.5 to 30.0 microSeconds
    Vertical:
                      Input Impedance
                             Typical Signal
                              Acceeptable range
Greater than 1k ohms
180 microSeconds
100 to 1200 microSeconds
  Video:
                       Input Impedance
                       Bandwidth


470 Ohms
Within 3 db from 10 Hz to 26MHz
Composite Video
                      Signal:
                      Input Impedance
                      Bandwidth
0.7V to 1.8V of composite peak to peak video
75 Ohms
Within 3 db from 10 Hz to 26MHz
Geometric Distortion Within 2% EIA Standard Dot/Ball chart. Variation between adjacent characteristics not more than 10% in alpha numeric display application.
High Voltage: Over 10kV at 50 microAmps of beam current with no more than 0.5kV variation from zero beam to 100 microAmps of beam current.
Controls Brightness, contrast, vertical size, vertical hold, vertical linearity, horizontal hold, horizontal video centering and focus
Environmental
                Operating Temperature
                Storage Temperature
                Operating Altitude		 0°C to 55°C
-20°C to 65°C
10,000 ft. max.
Power: 12VDC @ 1150 mA, nominal
Dimensions (HxWxD): 7.95"w x 5.90" h x 8.20"d.
Weight (approx.): 10.0 lbs., Shiping: 12 lbs.
industrial monitor pdf

Data Sheet


Drawing 94-008

QUESTIONS? CALL 630.893.1720
© Omni Vision Inc. 2016
504 Congress Circle North. Unit B. Roselle, IL 60172. USA.
PHONE: 1.630.893.1720      FAX:1.630.893.9991
Email: info@omnivisionusa.com