Industrial TFT Flat Panel Color LCD Display Monitor
Dual 10.4" TFT Color LCD Flat Panel NTSC/PAL Video Monitor
FP10G

 

This Omni Vision state of the art dual video display module has two TFT active matrix LCD panels and will display standard video signals from a CCTV camera, VCR, or any equivalent video source (NTSC/PAL). Just apply +12 volts DC power and connect the video signals and the monitors will display the video in full motion color. Each monitor can display video from different sources. Options include video on one screen and computer graphics or data displayed on the other screen (option must be requested at time of purchase).

Display Specification:

Active Matrix - 10.4" TFT color LCD (264 mm diagonal)
Viewing Size - 8.31" X 6.24" (211 x 158 mm)
Viewing Angle - Horizontal +/- 45 degrees Vertical +30/-20 degrees
Max Resolution - 640 x 480 pixels
Pixel Pitch - 0.33 (H) x 0.33 (W) mm
Display Color - 262,144 colors
Brightness - Full white >165 cd/m sq'd (NITS)
Contrast Ratio - Typically 150:1

 
General Specification:
  • Two LCD panels assembled to a sturdy metal chassis with a back cover and a mount from the rear metal bezel
  • Service controls available – Auto set up, Phase, Brightness, Contrast, H & V positioning
  • Temperature - Operating from 0 to +50 degrees C
    Storage from -25 to +60 degrees C
  • Video input - RCA or BNC connector
  • Video input signal - Composite Video - 1 volt p-p, 75 ohms
  • Input signal formats - Standard NTSC, PAL, S-Video signal
  • Computer interface option – VGA (640x480 only) signal thru 15-pin HD “D” sub
  • Power input - +12 vdc
  • AC power adapter (optional) - AC 100-240V/60 Hz, 12 v @ 3.3 A
  • Power consumption - Less than 10 watts each
  • Overall Dimensions – 20.125" x 10.125" x 2.50" WxHxD
  • Panel opening requirements – 20.125” x 9.25” WxH

QUESTIONS CALL 630.893.1720