Industrial Monochrome CRT Monitor
12" Open Frame or Kit Monitor
LP 12 Series
(See table below for model numbers)

    

Select from 3 Styles

Style B 0° Tilt Tube
Style F 10° Tilt Vertical Mount
Style G10° Tilt Horizontal Mount

   

This Omni Vision monitor is offered in an open frame chassis or as a kit version product for applications where a small display is required and the input signal can be composite video or TTL or analog video with TTL sync. This low power CRT module is a great solution. This 12" CRT provides great viewing angles and higher brightness levels. The main circuit board is made of industrial grade epoxy/fiber glass reinforced material with an FR4 rating.

FEATURES
• All circuitry is on a single, double sided, plated through PCB.
• All controls are easily accessible from the top of monitor.
• The video display is stabilized through the use of a voltage controlled, temperature compensated feedback to synchronized free run oscillator.
• Electronic horizontal video centering.
• Geometric distortion - within 2 % EIS Standard Dot/Ball Chart or variation between adjacent characters not more than 10 % in alpha numeric display applications
• High Voltage - Over 10 kV at 50 microamperes of beam current with no more than 0.5 kV variation from zero beam to 100 microamperes beam current
   
SPECIFICATIONS    
CRT size:

12"
Phosphor: White P4 standard. Green and Amber optional.
Display size:

55 sq. in. max.
Scanning: Interlaced & Non-interlaced
Horizontal frequencies: 15 to 48.3 kHz ± 500 Hz
Vertical frequencies: 50 or 60 Hz
Video Response:

From 20 to 65 MHz
Maximum Resolution: 1024 X 768 @ 60 Hz
Display Color: Unlimited Gray Scale
Agency Approvals: UL, cUL, TÜV
Agency Compliance: FDA, CE, FCC
Dimensions (HxWxD): See mechanical drawings:
Style B: 94-012; Style F: 94-012; Style G: 94-014
Weight (approx.): Depends on product version: chassis or kit .
   
ADDITIONAL SPECIFICATIONS
TTL Signals
Signal
Positive polarity + 2.5 v to 5.0 v
Video
 Input Impedance Bandwidth 470 ohms Within 3 dB from 10 Hz to 26 kHz
Vertical
 Input Impedance Typical Signal Greater than 1k Ohms 180 micro seconds
Horizontal
 Input Impedance Typical Signal Greater than 6k Ohms 2.5 to 8 micro seconds
Composite Video
Signal
 Positive video - negative sync 0.7 v to 1.8 v peak to peak composite
Input Impedance Bandwidth 75 Ohms Within 3 dB from 10 Hz to 26 kHz

GENERAL INFORMATION
• On board service controls Brightness, Contrast, Focus Horizontal [Size, Centering, Hold],
          Vertical [Size, Centering, and Linearity]
• Optional remote brightness interface available
• Input signal type standard - Analog Video - 0 to 0.7 volts
            Horizontal & Vertical Sync Signals - TTL level 0 to 5 volts
• Signal Connectors - Standard card edge connector
• Input Power - Standard +12 vdc @ 1.5 A (typical)
• Input Power Connector - Standard card edge connection
• Optional - Remote AC Power Input - 100-240 VAC auto ranging (47-63 Hz)
• Temperature - Operating from 0 to +55 ° C
                      -Storage from -20 to +65 ° C

ORDERING INFORMATION
When ordering, compile model number from the options listed below. Example: LP12-18-G-2A-P4 specifies Model LP12 with 18 kHz frequency, NTSC, factory assigned number and white phosphor tube.

LP12-XX-Y-ZZ-?
Frequency
Horizontal (kHz)
Signal
Chassis
Kit
Factory Assigned
Phosphor Color
15
18
21
24
31
35
48
Composite Video
G NTSC or PAL
G NTSC or PAL
1-9 or
A-Z
or
combination
P4 White
TTL
E Std TTL or Analog Video w/TTL sync.
E Std TTL or Analog Video w/TTL sync.
P31 Green
LA Amber
   
DIMENSIONS
Drawing 94-012 for Chassis Model LP12, Style B
Drawing 94-013 for Chassis Model LP12, Style F  


 
Drawing 94-014 for Chassis Model LP12, Style G  
 
PRINTING
 The following PDF files may be used for printing A-size drawings 94-012, 94-013 and 94-014 or the Data Sheet 		 
Chassis Drawing 94-012
Chassis Drawing 94-013
Chassis Drawing 94-014

Data Sheet for LP12 Series


   
QUESTIONS CALL 630.893.1720