back to options industrial replacement monitor menu back to main industrial replacement monitor menu back to industrial replacement monitor size menu

Industrial LCD Monitor- CRT Replacement

8.4" Industrial Replacement Monitor LCD Module
for 10" color CRT Replacement

Model FP08B4GO-xx Series Box Chassis version E103C-11 replacement is
Omni Vision # FP08B4G0-11 - for mechanical detail use drawing 94-300

Low Profile Chassis version E103C-21 replacement is Omni Vision # FP08B4G0-21
for mechanical detail use drawing 94-301

industrial lcd 8.4 inch monitor 10 inch crt replacement
OmniVision # FP08B4GO-11 Industrial Replacement Monitor LCD for Box Chassis

industrial lcd 8.4 inch monitor 10 inch crt replacement
OmniVision # FP08B4GO-21 Industrial Replacement Monitor LCD Low Profile Chassis

This Omni Vision 8.4" industrial LCD module drops into sturdy industrial 10" color CRT monitor open frame, metal chassis applications. It is designed to replace the 10" color CRT and it's associated electronics while maintaining high-resolution image requirements of wide-angle viewing and bright light output. This module operates as a standard plug-n-play monitor in an industrial equipment environment.      

Industrial Replacement Monitor LCD Module
for 10" Color CRT Monitor

If your system requires a monitor with the following parameters:
• AC power between 100 and 264 VAC at 50 or 60 Hertz
• AC power interface is standard IEC 320 connector
• Signal inputs of -
    • VGA - horizontal frequency 31.468 kHz, vertical frequency 59.941 Hz
                horizontal frequency 31.468 kHz, vertical frequency 70.087 Hz
    • VESA VGA - horizontal frequency 37.500 kHz, vertical frequency 75 Hz
    • SVGA - horizontal frequency 35.156 kHz, vertical frequency 56.25 Hz
    • VESA SVGA - horizontal frequency 37.879 kHz, vertical frequency 60.317 Hz
    • NEC VGA - horizontal frequency 24.823 kHz, vertical frequency 56.416 Hz
    • CGA - horizontal frequency 15.70 kHz, vertical frequency 59.924 Hz
    • EGA - horizontal frequency 21.851 kHz, vertical frequency 59.701 Hz
• Signal interface is standard analog 15-pin HD "D-sub" connector
• Existing monitor has standard 14" color CRT installed
• CRT needs to fit bezel to match contours
• Need something to match CRT mounting holes

If all these requirements are met, than it's easy to replace the CRT and electronics with this    module
• Power down
• Remove signal and power cables
• Remove 14" color CRT
• Remove drive (main board) electronics
• Mount the replacement module into existing CRT mounting holes
• Connect power and signal
• Turn on the power

Industrial Replacement Monitor LCD
Options:

• Alternate power requirements and interface connections available
• Alternate signal requirements and interface connections available
     • CGA and EGA signal interface with 9-pin "D-sub" connector
• Alternate mechanical packaging available
     • Complete CRT type open frame chassis available
     • Complete CRT type box chassis available
• Alternate white bezel adapter or no bezel adapter available

Industrial Replacement Monitor LCD
DISPLAY SPECIFICATIONS
 
Original 10" color CRT

New 8.4" color LCD

Diagonal
230 mm
213.4 mm
Usable viewing area
185 x 135 mm

170.4 x 127.8 mm

Dot pitch
0.26 mm
0.213 x 0.213 mm
CRT curvature
495 mm
0 mm (flat)
Max resolution
800 x 600 @ 60 Hz

800 x 600 @ 60 Hz

Horizontal frequency
31 to 38 kHz
15.7 to 54 kHz
Vertical frequency
50 to 90 Hz
56 to 85 Hz
Brightness (full white)
32 FL (109 nits)
220 nits (64 FL)
Contrast ratio
Not defined
500:1
Industrial Replacement Monitor LCD
GENERAL SPECIFICATIONS
Sturdy metal chassis with mounting holes equivalent to 10"
  color CRT mounting hole pattern
• Plastic bezel with equivalent 10" color CRT radius of curvature
• User service controls of brightness, contrast, auto set up, etc.
• User service controls accessed in rear
• Temperature — Operating from 0 to +55 °C
                     —- Storage from -20 to +65 °C
• Input Signal Connector - 15 pin mini D-sub
• AC Power Range - 90 VAC to 264 VAC (47 Hz to 63 Hz)
• Agency Compliance - UL

PRINTING
The following PDF file may be used for printing the Data Sheet

 

pdf image
Industrial Replacement Monitor LCD Data Sheet for
10" CRT Replacement Chassis

Industrial Replacement Monitor LCD Drawing for
10" Replacement Box Chassis 94-300

Industrial Replacement Monitor LCD Drawing for
10" Replacement Low Profile Chassis 94-301

Back to Top
QUESTIONS? CALL 630.893.1720


© Omni Vision Inc. 2012
2000 Bloomingdale Rd. Units 245-250. Glendale Heights, IL. USA.
PHONE: 1.630.893.1720      FAX:1.630.893.9991
Email: info@omnivisionusa.com