back to options industrial replacement monitor menu back to main industrial replacement monitor menu back to industrial replacement monitor size menu

Industrial Monitors- Flat Panel LCD Display

12.1" Industrial Replacement LCD Monitor Module
to Retrofit Universal type 14" color CRT Monitors

Model FP12B4GO-00

LCD Retrofit Module for Universal 14" Color CRT Monitors

Replacement Industrial LCD Monitor

This Omni Vision 12.1" industrial LCD module drops into applications using sturdy industrial 14" open frame, metal chassis color CRT monitors. It is designed to replace the 14" color CRT and it's associated electronics while maintaining high-resolution image requirements of wide-angle viewing and bright light output. This module operates as a standard plug-n-play monitor in an industrial equipment environment.

Industrial Replacement LCD Monitor
Retrofit Module for Universal 14" Color CRT Monitors

If your system requires a monitor with the following parameters:
• AC power between 100 and 264 VAC at 50 or 60 Hertz
• AC power interface is standard IEC 320 connector
• Signal inputs of -
    • VGA - horizontal frequency 31.468 kHz, vertical frequency 59.941 Hz
                horizontal frequency 31.468 kHz, vertical frequency 70.087 Hz
    • VESA VGA - horizontal frequency 37.500 kHz, vertical frequency 75 Hz
    • SVGA - horizontal frequency 35.156 kHz, vertical frequency 56.25 Hz
    • VESA SVGA - horizontal frequency 37.879 kHz, vertical frequency 60.317 Hz
    • NEC VGA - horizontal frequency 24.823 kHz, vertical frequency 56.416 Hz
    • CGA - horizontal frequency 15.70 kHz, vertical frequency 59.924 Hz
    • EGA - horizontal frequency 21.851 kHz, vertical frequency 59.701 Hz
• Signal interface is standard analog 15-pin HD "D-sub" connector
• Existing monitor has standard 14" color CRT installed
• CRT needs to fit bezel to match contours
• Need something to match CRT mounting holes

If all these requirements are met, than it's easy to replace the CRT and electronics with this module
• Power down
• Remove signal and power cables
• Remove 14" color CRT
• Remove drive (main board) electronics
• Mount the replacement module into existing CRT mounting holes
• Connect power and signal
• Turn on the power

Industrial Replacement LCD Monitor
Options:

• Alternate power requirements and interface connections available
• Alternate signal requirements and interface connections available
     • CGA and EGA signal interface with 9-pin "D-sub" connector
• Alternate mechanical packaging available
     • Complete CRT type open frame chassis available
     • Complete CRT type box chassis available
• Alternate white bezel adapter or no bezel adapter available

Industrial Replacement LCD Monitor
DISPLAY SPECIFICATIONS
 
Original 14" color CRT

New 12.1" color LCD

Diagonal
335 mm
310 mm
Usable viewing area
252 x 190 mm

246 x 184.5 mm

Dot pitch
0.28 mm
0.3075 x 0.3075 mm
CRT curvature
575 mm
0 mm (flat)
Max resolution
1024 x 768 @ 60 Hz

800 x 600 @ 60 Hz

Horizontal frequency
31 to 48 kHz
15.7 to 54 kHz
Vertical frequency
50 to 90 Hz
56 to 85 Hz
Brightness (full white)
32 FL (109 nits)
300 nits (87 FL)
Contrast ratio
Not defined
500:1
Industrial Replacement LCD Monitor
GENERAL SPECIFICATIONS

Sturdy metal chassis with mounting holes equivalent to 14" color CRT mounting hole pattern
• Plastic bezel with equivalent 14" color CRT radius of curvature
• User service controls of brightness, contrast, auto set up, etc.
• User service controls accessed in rear
• Temperature — Operating from 0 to +55 °C
                     —- Storage from -20 to +65 °C
• Input Signal Connector - 15 pin mini D-sub
• AC Power Range - 90 VAC to 264 VAC (47 Hz to 63 Hz)
• Agency Compliance - UL (UR, cUR) and CB

PRINTING
The following PDF file may be used for printing the Data Sheet

 

industrial replacement monitor pdf image

Industrial Replacement LCD Monitor
Data Sheet for retrofit Universal 14" CRT Monitors

Industrial Replacement LCD Monitor
Drawing 94-510 to retrofit Universal 14" Monitors

Back to Top
QUESTIONS? CALL 630.893.1720


© Omni Vision Inc. 2012
2000 Bloomingdale Rd. Units 245-250. Glendale Heights, IL. USA.
PHONE: 1.630.893.1720      FAX:1.630.893.9991
Email: info@omnivisionusa.com