back to main menu back to options menu back to size menu
Industrial Monitor- Monochrome CRT Display
5" Open Frame Box Monitor
industrial monitor 5 inch open frame monitor

Features
• HIGH PERFORMANCE; 660 LINES OF    RESOLUTION
• LOW POWER: 12VDC a 660mA
• HIGH RELIABILITY DESIGN: DOUBLE SIDED,
   PLATED THRU PCB
• CUSTOM DESIGNS AVAILABLE
• COMPETITIVE PRICE/QUICK RESPONSE

The design of the Omni Vision 5" monitor provides high performance at a reasonable cost. Display stability over a wide temperature ranger and crisp resolution are the cornerstones of Omni Vision 5" 's performance.

FEATURES
• All circuitry is on a single, double sided, plated through PCB.
• All controls are together and are easily accessible from the top of the    monitor.
• The video display is stabilized through use of voltage controlled,    temperature compensated feedback to synchronized free oscillators.
• Electronic horizontal video centering.
• The Omni Vision 5" is designed to UL. CSA specifications and applicable    DHHS rules on X-Radiation.
• 10 pin edge connector.
• Polished or anti glare faceplates.
• Omni Vision 5" Chassis.

RESOLUTION

With a video amplifier response to 2OMHz in either the TTL or Composite Video version, video and alpha numeric data is displayed clearly and crisply with a Center Resolution of 650 lines.
POWER
When scanning full screen, the Omni Vision 5" operates nominally at 12VDC and 650mA
OPTIONS
• Remote Brightness Control
• Remote Contrast Control
• Wide range at Phosphors Omni Vision 5 Kit
• Omni vision 5" Space Saving Chassis
• BNC Video Input Connector
• +12VDC Power Connector
• Also 6" CRT, chassis version available

SPECIFICATIONS
CRT:

5" Diagonal, 70° deflection angle, viewing angle 15 in² max.

Neck: 20mm
Display size:

127 x 95 mm (5.0" x 3.75")

Scanning: Factory adjusted for operaton within 1kHz of center frequencies at 15.7kHz or 18.6kHz
Input Signals  
TTL
    Signal:          Positive polarity
    Horizontal:
                       Input Impedance
                       Typical Signal
                       Acceptable range
+2.5V to +5.0V; Reverse polarity signals may require board modification

Greater than 6k ohms
4.5 microSeconds
2.5 to 30.0 microSeconds
    Vertical frequencies:
                      Input Impedance
                      Typical Signal
                      Acceeptable range

Greater than 1k ohms
180 microSeconds
100 to 1200 microSeconds
  Video:
                       Input Impedance
                       Bandwidth


470 Ohms
Within 3 db from 10 Hz to 20MHz

Composite Video
                      Signal:
                      Input Impedance
                      Bandwidth

0.7V to 1.8V of composite peak to peak video
75 Ohms
Within 3 db from 10 Hz to 20MHz
Geometric Distortion Within 2% EIA Standard Dot/Ball chart. Variation between adjacent characteristics not more than 10% in alpha numeric display application.
High Voltage: Over 7kV at 50 microAmps of beam current with no more than 0.5kV variation from zero beam to 100 microAmps of beam current.
Controls Brightness, contrast, vertical size, vertical hold, vertical linearity, horizontal hold, horizontal video centering and focus
Environmental
               Operating Temperature
               Storage Temperature
               Operating Altitude
0°C to 55°C
-20°C to 65°C
10,000 ft. max.
Power: 12VDC @ 650mA, nominal
Dimensions (HxWxD): 4.88"w x 4.60" h x 8.81"d.
Weight (approx.): 3.0 lbs., Shiping: 4.5 lbs.
pdf image

Data Sheet

Drawing 94-006

QUESTIONS CALL 630.893.1720

© Omni Vision Inc. 2016
504 Congress Circle North. Unit B. Roselle, IL 60172. USA.
PHONE: 1.630.893.1720      FAX:1.630.893.9991
Email: info@omnivisionusa.com