back to main menu back to options menu back to size menu
Industrial Monitor- Monochrome CRT Display
14" Open Frame Monitor
Replacement for Motorola & Display Tech Monitors DS4000
Industrial Monitor-
14 inch Replacement for Motorola & Display Tech Monitors DS4000

Features
• HIGH PERFORMANCE; 900 LINES OF RESOLUTION
• LOW POWER: 12VDC a 1250 mA
• HIGH RELIABILITY DESIGN: DOUBLE SIDED, PLATED THRU PCB
• CUSTOM DESIGNS AVAILABLE
• COMPETITIVE PRICE/QUICK RESPONSE

The design of the Omni Vision 14 monitor provides high performance at a reasonable cost. Display stability over a wide temperature ranger and crisp resolution are the cornerstones of Omni Vision 14's performance.

FEATURES
• All circuitry is on a single, double sided, plated through PCB.
• All controls are easily accessible from the top of the monitor.
• The video display is stabilized through use of voltage controlled, temperature compensated feedback to synchronized free oscillators.
• Electronic horizontal video centering.
• The Omni Vision 14is designed to UL. CSA specifications and applicable DHHS rules on X-Radiation.
• 10 pin edge connector.
Polished or anti glare faceplates.
• Omni Vision 14" Chassis.

RESOLUTION

With a video amplifier response to 26MHz in either the TTL or Composite Video version, video and alpha numeric data is displayed clearly and crisply with a Center Resolution of 900 lines.
POWER
When scanning full screen, the Omni Vision 9 operates nominally at 12VDC and 1250 mA
OPTIONS
• Remote Brightness Control
• Remote Contrast Control o
• Wide range at Phosphors Omni Vision 14 Kit
• BNC Video Input Connector
• +12VDC Power Connector
• 10 or 20 pin header

SPECIFICATIONS
CRT:

14" Diagonal, 90° deflection angle, viewing angle 93 in² max.

Neck: 20mm
Scanning Frequencies: Factory adjusted for operaton within 1kHz of center frequencies at 15.7kHz, 18.6kHz or 21.6kHz.
Input Signals  
TTL
    Signal:                  Positive polarity
    Horizontal:
                                Input Impedance
                                     Typical Signal
                             Acceeptable range

 

+2.5V to +5.0V; Reverse polarity signals may require board modification

Greater than 6k ohms
4.5 microSeconds
2.5 to 30.0 microSeconds

    Vertical:
                                Input Impedance
                                     Typical Signal
                              Acceeptable range

Greater than 1k ohms
180 microSeconds
100 to 1200 microSeconds
  Video:
                                Input Impedance
                                           Bandwidth


470 Ohms
Within 3 db from 10 Hz to 26MHz

Composite Video
                                                 Signal:
                               Input Impedance:
                                           Bandwidth:

0.7V to 1.8V of composite peak to peak video
75 Ohms
Within 3 db from 10 Hz to 26MHz
Geometric Distortion Within 2% EIA Standard Dot/Ball chart. Variation between adjacent characteristics not more than 10% in alpha numeric display application.
High Voltage: Over 10kV at 50 microAmps of beam current with no more than 0.5kV variation from zero beam to 100 microAmps of beam current.
Controls Brightness, contrast, vertical size, vertical hold, vertical linearity, horizontal hold, horizontal video centering and focus
Environmental
                     Operating Temperature
                         Storage Temperature
                             Operating Altitude
                                             Humidity

0°C to 55°C
-20°C to 65°C
10,000 ft. max.
95 percent humidity/non-condensing
Power: 12VDC @ 1250 mA, nominal
Dimensions (HxWxD): 12.43"w x 10.00" h x 11.69"d.
Weight (approx.): 12.0 lbs., Shiping: 14.0 lbs.
pdf image

Data Sheet


Drawing 94-014

QUESTIONS? CALL 630.893.1720


© Omni Vision Inc. 2016
504 Congress Circle North. Unit B. Roselle, IL 60172. USA.
PHONE: 1.630.893.1720      FAX:1.630.893.9991
Email: info@omnivisionusa.com